User`s manual

P-660 Series Support Notes

Assignment Otherwise, set to Static and enter the IP in the following IP Address field.

IP Address

This field can not be configured if the ISP provides the IP for the P-660

dynamically. Otherwise, enter the IP that the ISP gives to you.

3. Setup the P-660 as a DHCP Relay

What is DHCP Relay?

DHCP stands for Dynamic Host Configuration Protocol. In addition to the DHCP

server feature, the P-660 supports the DHCP relay function. When it is configured as

DHCP server, it assigns the IP addresses to the LAN clients. When it is configured as

DHCP relay, it is responsible for forwarding the requests and responses negotiating

between the DHCP clients and the server. See figure 1.

Setup the P-660 as a DHCP Client

1. Toggle the DHCP to Relay in menu 3.2 and enter the IP address of the DHCP

server in the 'Relay Server Address' field.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup

DHCP= Relay

Client IP Pool Starting Address= N/A

Size of Client IP Pool= N/A

Primary DNS Server= N/A

Secondary DNS Server= N/A

Relay Server Address= 192.168.1.2

TCP/IP Setup:

IP Address= 192.168.1.1

IP Subnet Mask= 255.255.255.0

RIP Direction= Both

Version= RIP-1

Multicast= None