User`s manual

P-660 Series Support Notes

Menu 3.2 - TCP/IP and DHCP Setup

DHCP Setup

DHCP= None

Client IP Pool Starting Address= N/A

Size of Client IP Pool= N/A

Primary DNS Server= N/A

Secondary DNS Server= N/A

Remote DHCP Server= N/A

TCP/IP Setup:

IP Address= 192.168.1.1

IP Subnet Mask= 255.255.255.0

RIP Direction= None

Version= N/A

Multicast= None

IP Policies=

Edit IP Alias= No

3. Configure for Internet setup in Menu 11-Remote Node Profile.

Menu 11.1 - Remote Node Profile

Rem Node Name= Bridge Route= None

Active= Yes Bridge= Yes

Encapsulation= RFC 1483 Edit IP/Bridge= No

Multiplexing= LLC-based Edit ATM Options= No

Service Name= N/A Edit Advance Options= No

Incoming: Telco Option:

Rem Login= N/A Allocated Budget(min)= N/A

Rem Password= N/A Period(hr)= N/A

Outgoing: Schedule Sets= N/A

My Login= N/A Nailed-Up Connection= N/A

My Password= N/A Session Options:

Authen= N/A Edit Filter Sets= No

Idle Timeout(sec)= N/A

Key Settings:

Option Description

Encapsulation

Select the correct Encapsulation type that your ISP supports. For example, RFC

1483.

Multiplexing Select the correct Multiplexing type that your ISP supports. For example, LLC.

Router/ Bridge Disable routing mode and enable bridge mode, Bridge = Yes.

4. Configure ATM setting in Menu 11.6-Remote Node ATM Layer Options. In Menu

11.1, setup "Edit ATM Options= Yes" to enter Menu 11.6 sub-Menu.