User`s manual

P-660 Series Support Notes
192
All contents copyright © 2005 ZyXEL Communications Corporation.
sys filter set actnomatch [type 0-2 =
checknext | forward | drop]
Set the action for not match
Menu 21 filter
sets
sys filter set offset [#] Set offset for the generic rule
Menu 21, it? for
generic filter
sys filter set length [#] Set the length for generic rule
Menu 21, it? for
generic filter
sys filter set mask [#] Set the mask for generic rule
Menu 21, it? for
generic filter
sys filter set value [(depend on length
in hex)]
Set the value for generic rule
Menu 21, it? for
generic filter
sys filter set clear Clear the current filter set
Menu 21
sys filter set save Save the filter set parameters
sys filter set display [set#][rule#]
Display Filter set information. W/o
parameter, it will display buffer
information.
sys filter set freememory Discard Changes
sys snmp disp
Display SNMP parameters
Menu 22
sys snmp get [community] Set the community string of get
Menu 22 SNMP
sys snmp set [community] Set the community string of set
Menu 22 SNMP
sys snmp trusthost [IP address] Set the IP address of trusted host
Menu 22 SNMP
sys snmp trap community
[community]
Set the community string of trap
Menu 22 SNMP
sys snmp trap destination [IP address] Set the destination address of trap
Menu 22 SNMP
sys snmp discard Discard changes
sys snmp clear Clear Working Buffer
sys snmp save Set the SNMP parameters
Menu 22 SNMP
sys password [new password] Set system password [save immediately]
Menu 23 system
password
sys baud [1-5]
Index 12,3 will be 38400,19200, 9600,
57600, 115200 bps [save immediately]
Menu 24.2.2
console speed
sys server load
Load setting before editing
sys server access [ftp|telnet|web]
[access type]
Set the server access type to be 0: ALL,
1: None, 2:LAN only, 3:WAN only
Menu 24.11
remote
management
sys server port [ftp|telnet|web] [port] Set the server port number
Menu 24.11
remote
management
sys server secureip[ftp|telnet|web]
[address]
Set the server security IP address
Menu 24.11
remote
management
sys server disp [1]
Display server settings, [1] means
display buffer
sys server save
Save the embedded server (remote
management) parameters
wlan load
Load system parameters into working
buffer
Menu 3.5 for
Wireless LAN
wlan disp Display the working buffer
Menu 3.5 for
Wireless LAN
wlan essid [name] Set the wireless ESSID
Menu 3.5 for
wireless LAN