User`s manual

P-660 Series Support Notes
189
All contents copyright © 2005 ZyXEL Communications Corporation.
lan dhcp server gateway [IP address] Set DHCP gateway
Menu 3.2
lan dhcp server netmask [subnet
mask]
Set DHCP subnet mask
Menu 3.2
lan dhcp server leasetime [second] Set DHCP lease time
Menu 3.2
lan dhcp server renewaltime [second] Set DHCP renew time
Menu 3.2
lan dhcp server rebindtime [second] Set DHCP rebind time
Menu 3.2
lan dhcp relay server [IP address] Set IP address of DHCP relay server
Menu 3.2
lan display Display LAN or IP alias parameters
Display Menu 3
lan clear Clear the Working Buffer
lan save Save LAN related parameters
wan node index [1-8]
Set the node pointer to specific wan
profile. If you want to set WAN profile,
please use this command first, system
will use the index number for pointing to
specific PVC (remote node), and for
consequent commands reference, if index
= 1 means it? ISP node
Menu 11.1
wan node clear
Clear the parameters of the temporary
WAN profile
Menu 11.1
wan node ispname [ISP name] Enable the name of wan node
Menu 11.1
wan node enable Enable the wan profile
Menu 11.1
wan node disable Disable the wan profile
Menu 11.1
wan node encap
[1483|pppoa|pppoe|enet]
Set the wan protocol
Menu 11.1
wan node mux [vc|llc] Set the wan multiplex
Menu 11.1
wan node ppp authen [chap|pap|both] Set PPP authentication type
Menu 11.1
wan node ppp username [name] Set PPP username
Menu 11.1
wan node ppp password [password] Set PPP password
Menu 11.1
wan node service [name] Set PPPoE service name
Menu 11.1
wan node bridge [on|off]
Set the wan bridge mode Menu 11.1
wan node routeip [on|off]
Set the wan IP routing mode Menu 11.1
wan node callsch
[set1#][set2#][set3#][set4#]
Set call schedule set, set number 0 means
empty
Menu 11.1
wan node nailedup [on|off] Set nailed up connection on/off
Menu 11.1
wan node vpi [num] Set the wan vpi. Range : 0~255
Menu 11.6
wan node vci [num] Set the wan vci. Range : 32~65535
Menu 11.6
wan node qos[ubr|cbr]
Set the wan QOS type to be UBR or
CBR
Menu 11.6
wan node pcr [num] Set the wan PCR value
Menu 11.6
wan node scr [num] Set the wan SCR value
Menu 11.6
wan node mbs [num] Set the wan MBS value
Menu 11.6
wan node wanip [static|dynamic]
[address]
Set the wan IP address
Menu 11.3
wan node remoteip [address] [subnet
mask]
Set the remote gateway IP address and
subnet mask
Menu 11.3
wan node nat [off | sua | full] [address
mapping #]
Set type wan NAT mode to be off or
SUA or Full feature
Menu 11.3
wan node rip [none|in|out|both] Set the wan RIP mode and RIP version
Menu 11.3