User`s manual

P-660 Series Support Notes
183
All contents copyright © 2005 ZyXEL Communications Corporation.
type <none|64|128|256> Set WEP key to 64, 128 or
256 bits.
Key Set <set> <value> Set WEP key value per set
Key Default <set> Set WEP default key set
macfilter
Enable Enable macfilter
Disable Disable macfilter
Action <allow|deny> When action match, allow or
deny this mac
Set <Set#> <MAC Address> Set mac address by set
Clear Clear all WLAN
configuration data.
Save Save WLAN configuration
working buffer to Rom file.
Power [1:19dbm, 2:18dbm,
3:16dbm, 4:15dbm,
5:14dbm]
Change TX power level.
reset Reset WLAN
1130cmd Internal usage.
restart_stat Show WLAN restart statistics
chg_dot11mode Set WLAN state to mix
mode, B only or G only
show_rxDesc Show number of Rx host
descriptors
acxstat Show acx run time statistics
9. Radius Related Command
Command Description
radius
auth show current radius authentication
server configuration
acco show current radius accounting
server configuration
10. 8021x Related Command
Command Description
8021x
debug level [debug level] set ieee802.1x debug message
level
trace show all supplications in the
supplication table
user
[username] show the specified user status in
the supplicant table
11. Configuration Related Command
Command Description
config The parameters of config
are listed below.
edit firewall active
<yes|no>
Activate or deactivate the
saved firewall settings
retrieve firewall Retrieve current saved
firewall settings
save firewall Save the current firewall
settings