User`s manual

P-660 Series Support Notes
182
All contents copyright © 2005 ZyXEL Communications Corporation.
7. Bridge Related Command
Command Description
bridge
mode <1/0>
(enable/disable)
turn on/off (1/0) LAN
promiscious mode
blt related to bridge local
table
Disp <channel> display blt data
reset <channel> reset blt data
traffic display local LAN
traffic table
monitor [on|off] turn on/off traffice
monotor. Default is
off.
Time <sec> set blt re-init interval
brt related to bridge route
table
Disp [id] display brt data
reset [id] reset brt data
cnt related to bridge
routing statistic table
Disp display bridge route
counter
clear clear bridge route
counter
stat related to bridge packet
statistic table
Disp display bridge route
packet counter
Clear clear bridge route
packet counter
disp display bridge source
table
8. WLAN Related Commands
Command Description
Wlan
active [on|off] [0|1] Turn on/off wireless lan
association Show association list
load Load WLAN configuration
into buffer.
Display Display WLAN
configuration data.
chid Configure channel ID?
essid Configure ESSID
hiddenssid [on/off] Enable/Disable hidden SSID
threshold
rts <RTS threshold value> Set threshold rts value
Fragment <Fragment threshold
value>
Set threshold fragmentation
value
wep