User`s manual

P-660 Series Support Notes
181
All contents copyright © 2005 ZyXEL Communications Corporation.
sequence set/display mp start
sequence
configure
ipcp
compress [on|off] enable/disable
compress
slots [slot_num] select number of slots
idcompress [on|off] enable/disable slot id
compress
address [on|off] set/display ip one
address option
atcp apple talk feature not
supported anymore
ccp
ascend [on|off] set/display ascend stac
flag
history <count> set/display stac history
count
check [argv] set/display stac check
mode
reset <mode> set/display stac reset
mode
pfc [on|off] set/display pfc flag
debug [on|off] set/display ccp debug
flag
iface
<iface> ipcp show the ipcp status of
the given iface
<iface> ipxcp show the ipxcp status of
the given iface
<iface> atcp
<iface> ccp
[reset|skip|flush]
show
the ccp status of the
given iface
<iface> mp show the mp status of
the given iface
show <channel> show the ppp channel
status
fsm
trace
break [num] [count]
[flag]
set the fsm log break
value
clear clear the fsm log data
disp display the fsm log data
filter [mask]
[protocol]
set the fsm log filter
value
Tdata
filter [protocol1]
[protocol2] ?
set the fsm filter data
disp display the fsm data
clear clear the fsm data
Struc dump fsm data structure
delay [inteval] set the delay timer for
sending first PPP
packet after call
answered