User`s manual

P-660 Series Support Notes
180
All contents copyright © 2005 ZyXEL Communications Corporation.
on set bod flag on
off set bod flag off
node <node> <dir> config the statistic
method for remote node
bod traffic data
debug [on|off] show bod debug flag
cnt
disp show bod state
clear clear bod state
ccp [on|off] set/display dial-in ccp
switch
lcp
acfc [on|off] set address/control field
compression flag
pfc [on|off] set protocol field
compression flag
mpin [on|off] set incoming call MP
flag
callback [on|off] set callback flag
bacp [on|off] set bandwidth
allocation control flag
echo
retry <retry_count> set/display retry count
to send echo-request
time <interval> set/display time interval
to send echo-request
ipcp
close close connection on ppp
interface
list <iface> show ipcp state
open open fsm link
timeout [value] set timeout interval
when waiting for
response from remote
peer
try
configure [value] set/display fsm try
config
failure [value] set/display fsm try
failure
terminate [value] set/display fsm try
terminate
compress [ on|off] set compress flag
slots [slot_num] set number of slots
idcompress
[on|
off] set/display slot id
compress
address [on|off] set/display ip one
address option
mp
default show link default flag
rotate set link default to rotate
split set link default to split
split [0|1] set/display link split
rotate [0|1] set/display link rotate