User`s manual

P-660 Series Support Notes
176
All contents copyright © 2005 ZyXEL Communications Corporation.
trace [on|off] turn on/off trace for
debugging
window [tcb] TCP input window size
samenet <iface1> [<iface2>] display the ifaces that in the
same net
uninet <iface> set the iface to uninet
tftp
support pritn if tfpt is support
stats display tftp status
xparent
join <iface1> [<iface2>] join iface2 to iface1 group
break <iface> break iface to leave
ipxparent group
antiprobe <0|1> 1:yes 0:no set ip anti-probe flag
igmp
debug [level] set igmp debug level
forwardall [on|off] turn on/off igmp forward to
all interfaces flag
querier [on|off] turn on/off igmp stop query
flag
iface
<iface> grouptm <timeout> set igmp group timeout
<iface> interval <interval> set igmp query interval
<iface> join <group> join a group on iface
<iface> leave <group> leave a group on iface
<iface> query send query on iface
<iface> rsptime [time] set igmp response time
<iface> start turn on of igmp on iface
<iface> stop turn off of igmp on iface
<iface> ttl <threshold> set ttl threshold
<iface> v1compat [on|off] turn on/off v1compat on
iface
robustness <num> set igmp robustness variable
status dump igmp status
pr
clear clear ip pr table counter
information
disp dump ip pr table counter
information
switch turn on/off ip pr table
counter flag
nat
timeout
gre [timeout] set nat gre timeout value
iamt [timeout] set nat iamt timeout value
generic [timeout] set nat generic timeout
value
reset [timeout] set nat reset timeout value
tcp [timeout] set nat tcp timeout value
tcpother [timeout] set nat tcp other timeout
value
update create nat system
information from