User`s manual

P-660 Series Support Notes
175
All contents copyright © 2005 ZyXEL Communications Corporation.
status [if] display routing table
add <dest_addr|default>[/<bits>]
<gateway> [<metric>]
add route
addiface <dest_addr|default>[/<bits>]
<gateway> [<metric>]
add an entry to the routing
table to iface
addprivate <dest_addr|default>[/<bits>]
<gateway> [<metric>]
add private route
drop <host addr> [/<bits>] drop a route
flush flush route table
lookup <addr> find a route to the
destination
errcnt
disp display routing statistic
counters
clear clear routing statistic
counters
status display ip statistic counters
adjTcp <iface> [<mss>] adjust the TCP mss of iface
udp
status display udp status
rip
accept <gateway> drop an entry from the RIP
refuse list
activate enable rip
merge [on|off] set RIP merge flag
refuse <gateway> add an entry to the rip
refuse list
request <addr> [port] send rip request to some
address and port
reverse [on|off] RIP Poisoned Reverse
status display rip statistic counters
trace enable debug rip trace
mode
<iface> in [mode] set rip in mode
<iface> out [mode] set rip out mode
dialin_user [show|in|out|both|none] show dialin user rip
direction
tcp
ceiling [value] TCP maximum round trip
time
floor [value] TCP minimum rtt
irtt [value] TCP default init rtt
kick <tcb> kick tcb
limit [value] set tcp output window limit
max-
incomplete
[number] Set the maximum number
of TCP incomplete
connection.
mss [value] TCP input MSS
reset <tcb> reset tcb
rtt <tcb> <value> set round trip time for tcb
status [tcb] [<interval>] display TCP statistic
counters
syndata [on|off] TCP syndata piggyback