User`s manual

P-660 Series Support Notes
174
All contents copyright © 2005 ZyXEL Communications Corporation.
table
update <num> <mac> <ip> update static dhcp mac table
dns
query
address <ipaddr> [timeout] resolve ip-addr to name
debug <num> enable dns debug value
name <hostname> [timeout] resolve name to ip-addr
status display dns query status
table display dns query table
server <primary> [secondary] [third] set dns server
stats
clear clear dns statistics
disp display dns statistics
table display dns table
httpd
debug [on|off] set http debug flag
icmp
echo [on|off] set icmp echo response flag
data <option> select general data type
status display icmp statistic
counter
trace [on|off] turn on/off trace for
debugging
discovery <iface> [on|off] set icmp router discovery
flag
ifconfig [iface] [ipaddr] [broadcast
<addr> |mtu <value>|dynamic]
configure network interface
ifdrop <iface> chaek if iface is available.
ping <hostid> ping remote host
pong <hostid> [<size> <time-
interval>]
pong remote host
extping <target address>
[-t] Continue to send
ECHO_REQ until Ctrl-C
input
[-c] Validate the reply data
[-d] [Data] Data pattern. The maximum
length of data is 255
characters.
[-f] Set DF flag.
[-l] [Data size] Datagram size in bytes
(with 28 bytes Header).
[-v] [TOS value] Specify the value of TOS
flag.
[-n] [Repeat value] The number of times to
send ECHO_REQ packet.
[-w] [Timeout value] Specify the value of
Timeout in seconds.
[-o] [IP address/IFace] To specify one IP address
or interface to be the Source
IP address.
[-p] [Min MTU] [Max MTU]
[Interval size]
Sweep range of sizes.
route