User`s manual

P-660 Series Support Notes
172
All contents copyright © 2005 ZyXEL Communications Corporation.
2. Exit Related Commands
Command Description
exit exit smt menu
3. Ethernet Related Commands
<ch-name> : enet0, mpoa00
Command Description
ether
config display LAN configuration
information
driver
cnt
disp <name> display ether driver counters
clear <name> clear ether driver counters
iface <ch_name> <num> send driver iface
ioctl <ch_name> Useless in this stage.
mac <ch_name> <mac_addr> Set LAN Mac address
reg <ch_name> display LAN hardware related
registers
rxmod <ch_name> <mode> set LAN receive mode.
mode: 1: turn off receiving
2: receive only packets of this
interface
3: mode 2+ broadcast
5: mode 2 + multicast
6: all packets
status <ch_name> see LAN status
init <ch_name> initialize LAN
version see ethernet device type
pkttest
disp
packet <level> set ether test packet display level
event <ch> [on|off] turn on/off ether test event
display
sap [ch_name] send sap packet
arp <ch_name> <ip-addr> send arp packet to ip-addr
mem <addr> <data> [type] write memory data in address
test <ch_id> <test_id> [arg3]
[arg4]
do LAN test
pncconfig <ch_name> do pnc config
mac <src_ch> <dest_ch>
<ipaddr>
fake mac address