User`s manual

P-660 Series Support Notes

163

C:\temp>ftp 192.168.1.1

Connected to 192.168.1.1

220 FTP version 1.0 ready at Thu Jan 1 00:02:09 1970

User (192.168.1.1:(none)): <Enter>

331 Enter PASS command

Password:****

230 Logged in

ftp> bin

200 Type I OK

ftp> put prestige.bin ras

200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 924512 bytes sent in 4.83Seconds 191.41Kbytes/sec.

ftp>

Here, the 'prestige.bin' is the local file and 'ras' is the remote file that will be saved

in the Prestige.

The Prestige reboots automatically after the uploading is finished.

Using FTP client software

Step 1

Rename the local firmware and configuration files to 'ras' and 'rom-0', because we can not specify the

remote file name in the FTP client software.

Step 2

Use FTP client from your workstation to connect to the Prestige by entering the IP address of the

Prestige.

Step 3

Enter the SMT password as the FTP login password. The default is '1234'.

Step 4

Press 'OK' key to ignore the username, because the Prestige does not check the username.

Example: