User`s manual

P-660 Series Support Notes

135

5. When you reach the farthest point of connection mark the spot. Now you move the

access point to this new spot as have already determine the farthest point of the access

point installation spot if wireless service is required from corner of the room.

6. Repeat step 1~5 and now you should be able to mark an RF coverage area as

illustrated in above picutre.

7. You may need more than one access point is the RF coverage area have not cover

all the wireless service area you needed.

8. Repeat step 1~6 of survey on site as necessary, upon completion you will have an

diagram and information of site survey. As illustrated below.