User`s manual

P-660 Series Support Notes
124
All contents copyright © 2005 ZyXEL Communications Corporation.
6= 00:00:00:00:00:00 18= 00:00:00:00:00:00 30= 00:00:00:00:00:00
7= 00:00:00:00:00:00 19= 00:00:00:00:00:00 31= 00:00:00:00:00:00
8= 00:00:00:00:00:00 20= 00:00:00:00:00:00 32= 00:00:00:00:00:00
9= 00:00:00:00:00:00 21= 00:00:00:00:00:00
10= 00:00:00:00:00:00 22= 00:00:00:00:00:00
11= 00:00:00:00:00:00 23= 00:00:00:00:00:00
12= 00:00:00:00:00:00 24= 00:00:00:00:00:00
------------------------------------------------------------------------------
ENTER here to CONFIRM or ESC to CANCEL:
Key Settings:
Option Descriptions
Filter Action
Allow or block association from MAC addresses contained in this list. If Allow Association
is selected in this field, hosts with MAC addresses configured in this list will be allowed to
associate with AP. If Deny Association is selected in this field, hosts with MAC addresses
configured in this list will be blocked.
MAC Address
This field specifies those MAC Addresses that you want to add in the list.
If you use WEB configuration, the MAC Address Filter configuration are as shown
below.
1. Using a web browser, login AP by giving the LAN IP address of AP in URL
field. Default LAN IP is 192.168.1.1, default password to login web
configurator is 1234.
2. Click Advanced, and click Wireless tab on the left.
3. Click MAC Filter tab on the top and select Yes in the Active field to enable
MAC Filter.
4. Select the Filter Action to allow or deny association from hosts in the list.
5. Enter the MAC Addresses which you may want to apply the filter to allow or
block associations from.
6. Click Apply to make your setting work.