User`s manual

P-660 Series Support Notes

123

ZyXEL MAC Filter Implementation

ZyXEL's MAC Filter Implementation allows users to define a list to allow or block

association from STAs. The filter set allows users to input 12 entries in the list. If

Allow Association is selected, all other STAs which are not on the list will be denied.

Otherwise, if Deny Association is selected, all other STAs which are not on the list

will be allowed for association. Users can choose either way to configure their filter

rule.

Configure the WLAN MAC Filter

The MAC Filter related settings in ZyXEL APs are configured in menu 3.5.1, WLAN

MAC Address Filter Configuration. Before you configure the MAC filter, you need to

know the MAC address of the client first. If not knowing what your MAC address is,

please enter a command "ipconfig /all" after DOS prompt to get the MAC (physical)

address of your wireless client.

If you use SMT management, the MAC Address Filter configurations are as shown

below.

Enter the MAC Addresses of wireless cards in the filter set to allow or deny

association from these cards.

Menu 3.5.1 - WLAN MAC Address Filter

Active= Yes

Filter Action= Allowed Association

------------------------------------------------------------------------------

1= 11:11:11:11:11:11 13= 00:00:00:00:00:00 25= 00:00:00:00:00:00

2= 00:00:00:00:00:00 14= 00:00:00:00:00:00 26= 00:00:00:00:00:00

3= 00:00:00:00:00:00 15= 00:00:00:00:00:00 27= 00:00:00:00:00:00

4= 00:00:00:00:00:00 16= 00:00:00:00:00:00 28= 00:00:00:00:00:00

5= 00:00:00:00:00:00 17= 00:00:00:00:00:00 29= 00:00:00:00:00:00