User`s manual

P-660 Series Support Notes

118

5. From general tab select TCP/IP and click property

6. Fill in your network IP address and subnet mask and click OK to finish.

7. Station A now are able to connect to Station B.

2. Configuring Infrastructure mode

• Infrastructure Introduction

• Configure wireless access point to Infrastructure mode with SMT

• Configure wireless access point to Infrastructure mode with Web configurator

• Configure wireless station to Infrastructure mode

Infrastructure Introduction

What is Infrastructure mode?

Infrastructure mode, sometimes referred to as Access Point mode, is an operating

mode of an 802.11b/Wi-Fi client unit. In infrastructure mode, the client unit can

associate with an 802.11b/Wi-Fi Access Point and communicate with other clients in

infrastructure mode through that access point.