User`s manual

P-660 Series Support Notes

105

Traffic from each Ethernet port will be mapped to a specific PVC associated to an

ATM QoS. Administrators can assign an ATM QoS type (CBR, VBR, and UBR) and

cell rate (PCR, SCR) for each PVC.

z Ethernet port 1 (for VoIP service): map to PVC 1 that supports CBR ATM

QoS (high priority); traffic can be sent between Ethernet port 1 and PVC 1.

z Ethernet port 2 (for Video service): map to PVC 2 that supports VBR ATM

QoS (media priority); traffic can be sent between Ethernet port 2 and PVC 2

z Ethernet port 3 (for Internet service): map to PVC3 that supports UBR

ATM QoS (normal priority); traffic can be sent between Ethernet port 3 and

PVC 3

z Ethernet port 4 (reserved for other services): map to PVC4 that supports

CBR ATM QoS (normal priority), traffic can be sent between Ethernet port

4 and PVC 4

The following shows you how to configure the triple-play feature using the

CLI commands.

Step1, Access SMT Menu 24.8 on the device .

Step2, Enter the commands as shown in the figures to set the port-based policy

Map Ethernet port 1 to PVC 1

Map Ethernet port 2 to PVC 2