Wireless Firewall Router User's Guide

P-335 Series User’s Guide
97 Chapter 5 Wireless LAN (P-335WT)
5.4.13 802.1x Screen
In order to configure and enable 802.1x; click the Wireless LAN link under Network to
display the Wireless screen. Select 802.1x + No WEP from the Security list.
Figure 46 Wireless: 802.1x
The following table describes the labels in this screen.
Table 36 Wireless: 802.1x and No WEP
LABEL DESCRIPTION
ReAuthentication
Timer (in seconds)
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
The default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
Idle Timeout The Prestige automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed. The default time
interval is 3600 seconds (or 1 hour).
Authentication Server
IP Address Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number Enter the port number of the external authentication server. The default port
number is 1812.
You need not change this value unless your network administrator instructs you
to do so with additional information.