Wireless Firewall Router User's Guide

P-335 Series User’s Guide
Chapter 5 Wireless LAN (P-335WT) 86
Note: If you do not enable any wireless security on your Prestige, your network is
accessible to any wireless networking device that is within range.
Figure 38 Wireless: No Security
The following table describes the labels in this screen.
Table 30 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to reload the previous configuration for this screen.
5.4.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your Prestige allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys but only
one key can be enabled at any one time.
In order to configure and enable WEP encryption; click Wireless LAN and Wireless to the
display the Wireless screen.
5.4.3 WEP Encryption Screen
In order to configure and enable WEP encryption; click the Wireless LAN link under
Network to display the Wireless screen. Select Static WEP from the Security list.