Wireless Firewall Router User's Guide

P-335 Series User’s Guide
53 Chapter 2 Introducing the Web Configurator
DHCP Server General Use this screen to enable the Prestige’s DHCP server and to have DNS
servers assigned by the DHCP server.
Static DHCP Use this screen to assign IP addresses on the LAN to specific individual
computers based on their MAC addresses.
Client List Use this screen to view current DHCP client information and to always
assign an IP address to a MAC address (and host name).
NAT General Use this screen to enable NAT.
Port Forwarding Use this screen to configure servers behind the Prestige.
Trigger Port Use this screen to change your Prestige’s port triggering settings.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content Filter Filter Use this screen to block sites containing certain keywords in the URL and
set the days and times for the Prestige to perform content filtering.
VPN Summary Use this screen to view the rule summary.
Rule Setup Use this screen to configure VPN connections.
SA Monitor Use this screen to display and manage active VPN connections.
Global Setting Use this screen to allow NetBIOS through an IPSec tunnel.
TMSS General Use this screen to enable or disable TMSS.
Exception List Use this screen to decide which computers in the network you can apply
TMSS.
Virus Protection Use this screen to check the computers in the network for Trend Micro
Internet Security.
Parental Control Use this screen to allow a parent (LAN administrator) to control a LAN
user's Internet access privileges by blocking specified website categories.
Management
Static Route Static Route
Rules
Use this screen to configure IP static routes.
Bandwidth
MGMT
Configuration Use this screen to enable bandwidth management on an interface and edit
a corresponding rule.
Monitor Use this screen to view the Prestige’s bandwidth usage and allotments.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the Prestige.
TELNET Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the Prestige.
FTP Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the Prestige.
SNMP Use this screen to configure your Prestige’s settings for Simple Network
Management Protocol management.
DNS Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the Prestige.
Security Use this screen to change your anti-probing settings.
Table 4 Screens Summary
LINK TAB FUNCTION