Wireless Firewall Router User's Guide

P-335 Series User’s Guide

Chapter 23 Introducing the SMT 264

Figure 144 SMT Main Menu

P-335/P-335WT Main Menu

Getting Started Advanced Management

1. General Setup 21. Filter and Firewall Setup

2. WAN Setup 22. SNMP Configuration

3. LAN Setup 23. System Password

4. Internet Access Setup 24. System Maintenance

26. Schedule Setup

27. VPN/IPSec Setup

Advanced Applications

11. Remote Node Setup

12. Static Routing Setup

15. NAT Setup

99. Exit

Enter Menu Selection Number:

23.2.1 System Management Terminal Interface Summary

The following table describes the fields in the previous screen.

Table 107 Main Menu Summary

# MENU TITLE DESCRIPTION

1 General Setup Use this menu to set up your general information.

2 WAN Setup Use this menu to clone a MAC address from a computer on your

LAN.

3 LAN Setup Use this menu to set up your LAN connection.

4 Internet Access Setup Configure your Internet Access setup (Internet address, gateway,

11 Remote Node Setup Use this menu to configure detailed remote node settings (your

ISP is also a remote node) as well as apply WAN filters.

12 Static Routing Setup Use this menu to set up static routes.

15 NAT Setup Use this menu to specify inside servers when NAT is enabled.

21 Filter and Firewall Setup Use this menu to configure filters, activate/deactivate the firewall

and view the firewall log.

22 SNMP Configuration Use this menu to set up SNMP related parameters.

23 System Security Use this menu to change your password.

24 System Maintenance This menu provides system status, diagnostics, software upload,

etc.

26 Schedule Setup Use this menu to schedule outgoing calls.