Wireless Firewall Router User's Guide

P-335 Series User’s Guide
Chapter 17 Remote Management Screens 220
17.3 Telnet
You can configure your Prestige for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the Prestige.
Figure 120 Telnet Configuration on a TCP/IP Network
17.4 Telnet Screen
To change your Prestige’s Telnet settings, click the Remote MGMT link under Management
and the Telnet tab. The following screen displays.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Prestige using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 89 WWW Remote Management
LABEL DESCRIPTION