Wireless Firewall Router User's Guide

P-335 Series User’s Guide
215 Chapter 16 Bandwidth Management
Figure 118 Bandwidth Management Rule and Filter Configuration
The following table describes the labels in this screen.
Table 88 Bandwidth Management Edit
LABEL DESCRIPTION
Active Select this check box to have the Prestige apply this bandwidth management
rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Rule Name Use the auto-generated name or enter a descriptive name of up to 20
alphanumeric characters, including spaces.
BW Budget Specify the maximum bandwidth allowed for the rule in kbps. The
recommendation is a setting between 20 kbps and 20000 kbps for an individual
rule.
Priority Select a priority from the drop down list box. Choose High, Mid or Low. The
higher the number, the higher the priority.
Use All Managed
Bandwidth
Select this option to allow a rule to borrow unused bandwidth on the interface.
Bandwidth borrowing is governed by the priority of the rules. That is, a rule with
the highest priority is the first to borrow bandwidth. Do not select this if you want
to leave bandwidth available for other traffic types or if you want to restrict the
amount of bandwidth that can be used for the traffic that matches this rule.
Service Select a service for your rule or you can define your own.
Destination Address Enter the destination IP address in dotted decimal notation.
Destination Subnet
Netmask
Enter the destination subnet mask. This field is N/A if you do not specify a
Destination Address. Refer to the appendices for more information on IP
subnetting.
Destination Port Enter the port number of the destination. See Table 86 for some common
services and port numbers.
Source Address Enter the source IP address in dotted decimal notation.
Source Subnet
Netmask
Enter the destination subnet mask. This field is N/A if you do not specify a
Source Address. Refer to the appendices for more information on IP subnetting.