Wireless Firewall Router User's Guide

P-335 Series User’s Guide
Chapter 16 Bandwidth Management 214
16.3 Bandwidth Management Rule and Filter
Use the Bandwidth Management Rule Configuration screen to configure a bandwidth
management rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity
(bandwidth budgets) to specific applications and/or subnets.
16.3.1 Bandwidth Borrowing
Enable bandwidth borrowing by selecting Use All Managed Bandwidth on a rule to allow the
rule to use any unused bandwidth. Unused bandwidth is given to the highest priority rule first.
To edit a bandwidth management rule, click the edit icon under Modify. The following screen
displays.
Direction Select To LAN to apply bandwidth management to traffic that the Prestige
forwards to the LAN.
Select To WAN to apply bandwidth management to traffic that the Prestige
forwards to the WAN.
Select To WLAN to apply bandwidth management to traffic that the Prestige
forwards to the WLAN.
Name Use the auto-generated name or enter a descriptive name of up to 20
alphanumeric characters, including spaces.
Service Select a service for your rule or you can define your own in the Edit screen.
Dest Port Enter the port number of the destination. See Table 86 for a list of services and
port numbers.
Priority Select a priority from the drop down list box. Choose High, Mid or Low.
Modify Click the Edit icon to open the address mapping rule screen. Modify an existing
rule or create a new rule in the Rule Setup screen.
Click the Remove icon to delete an address mapping rule.
Select a rule index number's radio button and then click Edit to set up this
bandwidth management rule on the Prestige.
Apply Click Apply to save your customized settings.
Reset Click Reset to begin configuring this screen afresh.
Table 87 Bandwidth Management Configuration
LABEL DESCRIPTION