User`s guide

Chapter 9 VLAN
XS1920 Series User’s Guide
92
9.4 VLAN Configuration
Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click Advanced Application
> VLAN > VLAN Configuration to see the following screen.
Figure 65 Advanced Application > VLAN > VLAN Configuration
The following table describes the labels in the above screen.
9.5 Configure a Static VLAN
Use this screen to configure a static VLAN for the Switch. Click Static VLAN in the VLAN Status
screen to display the screen as shown next.
Type This field shows the type of private VLAN: Primary, Community or Isolated.
Port List This shows the ports mapped to the private VLAN using the Advanced Application >
Private VLAN or Advanced Application > VLAN > Static VLAN screen.
Change Pages Use the Previous and Next buttons to display different pages.
Table 34 Advanced Application > VLAN > Private VLAN Status (continued)
LABEL DESCRIPTION
Table 35 Advanced Application > VLAN > VLAN Configuration
LABEL DESCRIPTION
Static VLAN Setup Click Click Here to configure the Static VLAN for the Switch.
VLAN Port Setup Click Click Here to configure the VLAN Port for the Switch.
Subnet Based VLAN Setup Click Click Here to configure the Subnet Based VLAN for the Switch.
Protocol Based VLAN Setup Click Click Here to configure the Protocol Based VLAN for the Switch.
Voice VLAN Setup Click Click Here to configure the Voice VLAN for the Switch.
MAC Based VLAN Setup Click Click Here to configure the MAC Based VLAN for the Switch.