User`s guide

Chapter 9 VLAN
XS1920 Series User’s Guide
91
9.3 Private VLAN Status
Use this screen to view all private VLANs created on the Switch. See also Advanced Application >
Private VLAN.
Click Private VLAN Status in the VLAN Status screen to display the screen as shown next.
Figure 64 Advanced Application > VLAN > Private VLAN Status
The following table describes the labels in this screen.
Status This field shows how this VLAN was added to the Switch.
• Dynamic - using GVRP
• Static - manually added as a normal VLAN
• Private - manually added as a private VLAN (primary, isolated or community)
• Voice - manually added as a Voice VLAN
• MVR - added via Multicast VLAN Registration (MVR)
Private VLAN
Status
These fields show private VLAN information for the selected VLAN. See Section 9.3 on page
91 for related information on private VLANs.
Primary
VLAN
This field shows the primary VLAN ID in the selected VLAN.
Secondary
VLAN
This field shows the secondary VLAN ID in the selected VLAN.
Type This field shows the type of private VLAN: Primary, Community or Isolated.
Port List This shows the ports mapped to the private VLAN using the Advanced Application >
Private VLAN or Advanced Application > VLAN > Static VLAN screen.
Change Pages Click Previous or Next to show the previous/next screen if all status information cannot be
seen in one screen.
Table 33 Advanced Application > VLAN > VLAN Detail (continued)
LABEL DESCRIPTION
Table 34 Advanced Application > VLAN > Private VLAN Status
LABEL DESCRIPTION
Private VLAN
Status
These fields show information for the all private VLANs. See also Advanced Application >
Private VLAN.
Primary
VLAN
This field shows the primary VLAN ID in a private VLAN.
Secondary
VLAN
This field shows the secondary VLAN ID in a private VLAN.