User`s guide

Chapter 8 Basic Setting
XS1920 Series User’s Guide
82
8.9.9 IPv6 Prefix Setup
Use this screen to configure the Switch’s IPv6 prefix list for each interface. Click the link next to
IPv6 Prefix Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 57 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
The following table describes the labels in this screen.
Flags This field displays whether IPv6 hosts use DHCPv6 to obtain IPv6 stateful addresses
(M) and/or additional configuration settings (O).
Minimum Interval This field displays the minimum time interval at which the Switch sends router
advertisements for this interface.
Maximum Interval This field displays the maximum time interval at which the Switch sends router
advertisements for this interface.
Lifetime This field displays how long the router in router advertisements can be used as a
default router for this interface.
Suppress This field displays whether the Switch sends router advertisements and responses to
router solicitations on this interface (No) or not (Yes).
Table 27 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup (continued)
LABEL DESCRIPTION
Table 28 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
LABEL DESCRIPTION
Interface Select the IPv6 interface you want to configure.
Prefix Set the IPv6 prefix that the Switch includes in router advertisements for this interface.
Prefix Length Set the prefix length that the Switch includes in router advertisements for this
interface.
Valid Lifetime Specify how long (from 0 to 4294967295 seconds) the prefix is valid for on-link
determination.