User`s guide

Chapter 8 Basic Setting
XS1920 Series User’s Guide
68
Figure 45 Basic Setting > IP Configuration
The following table describes the labels in this screen.
Table 16 Basic Setting > IP Configuration
LABEL DESCRIPTION
Default Gateway Enter the IP address of the default outgoing gateway in dotted decimal notation.
Domain Name
Server
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to reset the fields.
IP Interface
Use these fields to create or edit IP routing domains on the Switch. Each is the IP address of the Switch in an
IP routing domain.
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP address,
subnet mask, a default gateway IP address and a domain name server IP address
automatically.
Static IP Address Select this option if you don’t have a DHCP server or if you wish to assign static IP
address information to the Switch. You need to fill in the following fields when you
select this option.
IP Address Enter the IP address of your Switch in dotted decimal notation for example
192.168.1.1.
IP Subnet Mask Enter the IP subnet mask of your Switch in dotted decimal notation for example
255.255.255.0.
VID Enter the VLAN identification number to which an IP routing domain belongs.