User`s guide

Chapter 9 VLAN
XS1920 Series User’s Guide
106
9.13 Technical Reference
This section provides technical background information on the topics discussed in this chapter.
9.13.1 Create an IP-based VLAN Example
This example shows you how to create an IP VLAN which includes ports 1, 4 and 8. Follow these
steps:
1 Activate this protocol based VLAN.
2 Type the port number you want to include in this protocol based VLAN. Type 1.
3 Give this protocol-based VLAN a descriptive name. Type IP-VLAN.
4 Select the protocol. Leave the default value IP.
5 Type the VLAN ID of an existing VLAN. In our example we already created a static VLAN with an ID
of 5. Type 5.
6 Leave the priority set to 0 and click Add.
Figure 77 Protocol Based VLAN Configuration Example
To add more ports to this protocol based VLAN.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 42 Port Based VLAN Setup (continued)
label Description