Product manual

- 34 -
012C6
The registration process is completed in three steps:
Step 1.
• Enter personal contact information.
• Enter an email account.
• An email with a validation will be sent to
the registered account.
• Open the e-mail and click on the link to
continue the registration.
Account validation must occur within
3 days of receipt of the email; if not the
process will have to be re-started.
Step 2
• Enter details about the solar power site/
home.
• Provide the installer’s name and contact
information to help direct current and
future homeowners to the installer for any
future project and service needs.
• Site information defaults to the homeowner
address but can updated to a different
address for alternate locations such as a
second home.
Step 3
• Link and validate the CDD to the solar
power site.
• Make sure the CDD is connected to the
internet.
• Enter the CDD’s RF MAC address (MAC
RF) in the 8 display elds.
• Click on the Validate button.
• When validated, the logger and all
congured inverters will be displayed
• Click I’m Done to complete the registration
process.
• An e-mail will be sent conrming that
the registration has been successfully
completed.