Product manual
- 22 -
010CC4
4 - CDD display operations
Description of the display menus
The CDD display consists of 2 lines with 16 characters per line. The operating status and statistical data of the
inverter can be viewed along with service messages for the operator, warning and alarm messages. Inverter
settings can also be modied using the display menus.
• The UP and DOWN buttons are used to move around inside a menu or to scroll through a list of settable
values.
• The ESC button returns the user to the previous submenu when navigating.
• The ENTER button is pressed to select a submenu or to conrm an entered value/parameter.
• The UP and DOWN buttons pushed together will open the main menus for statistics, data display and
default settings.
An outline of the menu structure is shown below. A detailed description of the menu items can be found in the
table on page 14.
Geo Position
>
Country STD
>
Remote update
>
Micro Manager
>
Total Energy
.... KWh
Tot output power
.... W
System quality
......
MICRO: X
EXTRA: Y
Alarm status
......
DD/MM/YY
HH/MM/SS
Network
......
Web Server IP
..........
MAC Addr. WLess
................
Subnet Mask
...........
Tot output Power
....W
Statistics
>
Total Energy
....kWh
Inverter data
>
PN
........
View
Information >
SN
..........
Firmware rel
>
Date
DD/MM/YY
Time
HH:MM:SS
Events
Alarm Present>
Change Language
>
Change
Settins >
Set Date/Time
>
Set Time Zone
>
Display Timeout
>
Network
>
Reset
Ground Fault ?
IP Gateway
..........
Primary DNS
..........
Secondary DNS
..........
WLess Enabled
Yes >
WLess AutoConn.
Yes >
Web Server
Reset Password?
WLess SSID:
......
The CDD cycles through the
GENERAL INFORMATION
display during normal operation
Press any button during normal
operation for access to set up
and view the BASIC menu
options of the CDD
The three MAIN menus are used to:
- Display statistics of the system and each inverter
- View a read only display of data related to the
CDD and the list of errors/warnings
- Modify CDD settings
Press any button on the CDD
Press and hold the UP/DOWN buttons on the CDD until
Set Password is displayed
Enter password 0010 to access three MAIN menus