Cable Router User's Guide
Table Of Contents
- P-2900-4HB
- Introduction and Configuration
- Advanced Setup
- Maintenance and Troubleshooting
- Product Specification, Appendices and Index
P-2900-4HB User’s Guide
69
CHAPTER 8
Static IP
8.1 Overview
Use the Static IP screen (see Section 8.2 on page 69) to assign static IP
addresses and configure the RIPv2 settings. See the Section 4.3 on page 41 for an
application example of how you can use static IP addresses.
8.2 The Static IP Screen
Click Advanced Setup > Static IP to open the following screen. Use this screen
to configure the static WAN IP addresses.
Figure 22 Advanced Setup > Static IP