Cable Router User's Guide
Table Of Contents
- P-2900-4HB
- Introduction and Configuration
- Advanced Setup
- Maintenance and Troubleshooting
- Product Specification, Appendices and Index
Chapter 4 Tutorials
P-2900-4HB User’s Guide
44
1 Configure the Advanced > Static IP screen as shown. Click Apply.
2 Ping A and B in the Maintenance > Diagnostic screen to test the connectivity.
You should get A’s and B’s responses. If they fail, make sure the network is
correctly connected and if each server has a firewall that they allow ping packets
from the ZyXEL Device. An example is shown next.
4.3.3 Configuring NAT
You must enable NAT on the ZyXEL Device if you want your LAN computers to
access the Internet using private IP addresses.