User`s guide

Chapter 2 Tutorial
P-2602HWUDL-D User’s Guide
60
Follow the steps below to configure your ZyXEL Device for Internet access using PPPoE in
this example.
Figure 23 Tutorial Example: WAN Connection with a Static Public IP Address
1 Click Network > WAN .
2 Select Routing in the Mode field and select PPPoE from the Encapsulation drop-down
list box.
3 Enter the information (such as the user name, password and VPI/VCI value) provided by
your ISP. If your ISP didn’t give you the service name, leave the field blank.
4 In the IP Address section, select Static IP Address and enter the first fixed public IP
address (“1.2.3.4” in this example).
5 Configure the IP address of the DNS server the ZyXEL Device can query to resolve
domain names. Select UserDefined and enter the first and second DNS server’s IP
addresses given by your ISP.
6 Click Apply to save your changes.
Public IP Addresses 1.2.3.4
1.2.3.5
1.2.3.6
1.2.3.7
Gateway IP Address 1.2.3.89
Subnet Mask 255.255.255.0
User Name exampleuser
Password abcd1234
DNS Server 1.2.1.1
1.2.1.2
Internet
192.168.1.1
1.2.3.4
WAN
LAN