User`s guide
Chapter 1 Introducing the ZyXEL Device
P-2602HWUDL-D User’s Guide
49
Refer to the Quick Start Guide for information on hardware connections.
1.6 The RESET Button
If you forget your password or cannot access the web configurator, you will need to use the
RESET button at the back of the device to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously and the password will be
reset to “1234”. You can also use the
1.6.1 Using the Reset Button
1 Make sure the POWER LED is on (not blinking).
USB Green On The ZyXEL Device recognizes a USB connection.
Blinking The ZyXEL Device is sending/receiving data to /from the USB
device connected to it.
Off The ZyXEL Device does not detect a USB connection.
PHONE Green On A SIP account is registered for the phone port.
Blinking A telephone connected to the phone port has its receiver off of
the hook or there is an incoming call.
Orange On A SIP account is registered for the phone port and there is a
voice message in the corresponding SIP account.
Blinking A telephone connected to the phone port has its receiver off of
the hook and there is a voice message in the corresponding SIP
account.
Off The phone port does not have a SIP account registered.
DECT Orange On One of the DECT phone’s associated SIP accounts for outgoing
calls is registered and there is a voice message for the
associated SIP account.
Blinking
(slow)
One of the DECT phones has its receiver off of the hook and
there is a voice message for the associated SIP account.
Blinking
(Fast)
The DECT base station is in registration mode. DECT phones
can register with the DECT base station.
One of the DECT phones is logging on if the green LED is
blinking at the same time.
Green On One of the DECT phone’s associated SIP accounts for outgoing
calls is registered.
Blinking
(slow)
One of the DECT phones has its receiver off of the hook.
Blinking
(Fast)
One of the DECT phones is logging on if the orange LED is
blinking at the same time.
Off The DECT base station is not in registration mode and there is
not a registered SIP account associated with any of the DECT
phones.
Table 2 LED Descriptions
LED COLOR STATUS DESCRIPTION