User`s guide

Chapter 10 Wireless LAN
P-2602HWUDL-D User’s Guide
160
10.5.1 No Security
Select No Security to allow wireless stations to communicate with the access points without
any data encryption.
" If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 112 Wireless: No Security
The following table describes the labels in this screen.
10.5.2 WEP Encryption Screen
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
Channel
Selection
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box.
Security Mode See the following sections for more details about this field.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced
Setup
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
Table 35 Wireless LAN: General
LABEL DESCRIPTION
Table 36 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.