User`s guide

Prestige 128+ ISDN Router
IPX Configuration 6-5
6.4 IPX Ethernet Setup
From Menu 3 - Ethernet Setup, select option Novell IPX Setup to go to Menu
3.3 - Novell IPX Ethernet Setup as shown in the figure below.
Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup
The following table describes the Novell IPX Ethernet Setup Menu.
Table 6-1 Novell IPX Ethernet Setup Fields
Field Description Options
Seed Router Determine if your Prestige is to act as a seed router.
Yes/No
Frame Type Enable/Disable the individual frame type.
Remember to enable only the ones that are actually
used on your network.
802.2
802.3
Ethernet II
SNAP
IPX Network
#
If your Prestige is a seed router, enter a unique
network number for each frame type enabled.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.