User`s guide

Prestige 128+ ISDN Router
6-4 IPX Configuration
6.2.1 Prestige on LAN with Server
If your Prestige is on a LAN with a seed router, you do not need to configure the
LAN network numbers. Your Prestige will learn the network number from the
seed router and add the routes to its routing table.
6.2.2 Prestige on LAN without Server
Each IPX network must have a seed router. If you only have NetWare clients on
your network, then you must configure the Prestige as a seed router and set up
unique network numbers for each frame type enabled using the Ethernet Setup
Menu.
6.3 IPX Spoofing
Your Prestige comes with several pre-defined call filters designed to prevent
certain IPX packets from triggering a call to a remote node.
The built-in call filters are defined as follows:
 Block periodical RIP (Routing Information Protocol) and SAP (Service
Advertising Protocol) response messages.
 Block NetWare serialization packets.
 Allow SAP and RIP inquiry packets.