User`s guide

Prestige 128+ ISDN Router
Remote Node TCP/IP Configuration 5-9
Table 5-3 Edit IP Static Route Menu Fields
Field Description
Route Name Enter a descriptive name for this route. This is for identification purposes
only.
Active This field allows you to activate/deactivate this static route.
Destination IP
Address
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a
route to a single host, use a subnet mask of 255.255.255.255 in the
subnet mask field to force the network number to be identical to the host
ID.
IP Subnet
Mask
Enter the subnet mask for this destination. Follow the discussion on IP
subnet mask in this chapter.
Gateway IP
Address
Enter the IP address of the gateway. The gateway is an immediate
neighbor of your Prestige that will forward the packet to the destination.
On the LAN, the gateway must be a router on the same segment as your
Prestige; over WAN, the gateway must be the IP address of one of the
remote nodes.
Metric Same meaning as those in the Remote Node Setup.
Private Same meaning as those in the Remote Node Setup.