User`s guide

Prestige 128+ ISDN Router
4-12 Remote Node Configuration
4.1.7 Remote Node Filter
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the
incoming and outgoing traffic between this remote node and the Prestige and to
prevent certain packets from triggering calls. You can specify up to 4 filter sets
separated by a comma, e.g., 1, 5, 9, 12, in each filter field. The default is no
filters.
Note that spaces are accepted in this field. For more information on defining the
filters, see Chapter 9. The Prestige comes with a prepackaged filter set,
NetBIOS_WAN, that blocks NetBIOS packets. You can include this in the call
filter sets if you wish to prevent NetBIOS packets from triggering calls to a
remote node.
Figure 4-4 Menu 11.5 – Remote Node Filter
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=