User`s guide

Prestige 128+ ISDN Router
Remote Node Configuration 4-9
4.1.6 Editing PPP Options
To edit the remote node PPP Options, move the cursor to the Edit PPP Options
field in Menu 11.1 - Remote Node Profile, and use the space bar to select Yes.
Press Enter to open Menu 11.2, as shown below.
Figure 4-3 Menu 11.2 - Remote Node PPP Options
The following table describes the Remote Node PPP Options Menu, and contains
instructions on how to configure the PPP options fields.
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 64
Target Utility(Kbps)= 32-48
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.