User`s guide

Prestige 128+ ISDN Router
3-8 Internet Access
Follow the instructions in the following table to configure TCP/IP parameters for
the Ethernet port.
Table 3-2 TCP/IP Ethernet Setup Menu Fields
Field Description Example
TCP/IP Setup
IP Address Enter the IP address of your Prestige in dotted decimal
notation
192.168.1.1
(default)
IP Subnet Mask Your Prestige will automatically calculate the subnet
mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask
computed by the Prestige
255.255.255.0
RIP
Direction
Press the space bar to select the RIP direction from
Both/In Only/Out Only.
Both
(default)
Version
Press the space bar to select the RIP version from RIP-
1/RIP-2B/RIP-2M.
RIP-1
(default)
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…]
to save your configuration, or press [Esc] at any time to cancel.