User`s guide

Prestige 128+ ISDN Router
Hardware Installation and Setup 2-7
2.5 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to
configure your Prestige.
Several operations that you should be familiar with before you attempt to modify
the configuration are listed in the table below.
Table 2-2 Main Menu Commands
Operation Press/<read> Description
Move forward to
another menu
[Enter] To move forward to a sub-menu, type in the number of
the desired sub-menu and press [Enter].
Move backward to
a previous menu
[Esc] Press the [Esc] key to move back to the previous menu.
Move the cursor
[Enter] or
[Up]/[Down]
arrow keys
Within a menu, press [Enter] to move to the next field.
You can also use the [Up]/[Down] arrow keys to move to
the previous and the next field, respectively.
Enter information Fill in, or
Press the
[Space bar] to
toggle
You need to fill in two types of fields. The first requires
you to type in the appropriate information. The second
allows you to cycle through the available choices by
pressing the [Space] bar.
Required fields
<
?>
All fields with the symbol <?> must be filled in order be
able to save the new configuration.
N/A fields <N/A> Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
Save your
configuration
[Enter] Save your configuration by pressing [Enter] at the
message [Press ENTER to confirm or ESC to cancel].
Saving the data on the screen will take you, in most
cases to the previous menu.
Exit the SMT Type 99, then
press [Enter].
Type 99 at the Main Menu prompt and press [Enter] to
exit the SMT interface.