User`s guide

Prestige 128+ ISDN Router

2-6 Hardware Installation and Setup

2.4 Power On Your Prestige

At this point, you should have connected the console port, the ISDN BRI port,

the Ethernet port and the power port to the appropriate devices or lines. You can

now apply power to the Prestige by flipping the power switch to on (I is ON,

O is

OFF).

Step 1. Initial Screen

When you power on your Prestige, it performs several internal tests as well as

line initialization. After the initialization, the Prestige asks you to press

Enter to

continue, as shown.

Figure 2-3 Power-On Display

Step 2.

Entering Password

The login screen appears after you press Enter, prompting you to enter the

password, as shown below.

For your first login, enter the default password

1234. As you type the password,

the screen displays an (X) for each character you type.

Please note that if there is no activity for longer than 5 minutes after you log in,

your Prestige will automatically log you out and will display a blank screen. If

you see a blank screen, press [Enter] to bring up the login screen again.

Figure 2-4 Login Screen

ethernet address: 00:a0:c5:98:23:12

R tti ISDN fi (2) Z XEL P ti DSS1 V 099