User`s guide

Prestige 128+ ISDN Router
System Maintenance 15-17
The blacklist function prevents the Prestige from re-dialing to an unreachable
phone number. It is a list of phone numbers, up to a maximum of 14, to which the
Prestige will not make an outgoing call. If the Prestige tries to dial to a phone
number and fails a certain number of times (configurable in Menu 24.9.1), then
the phone number is put in the blacklist. You will have to enable the number
manually before the Prestige will dial that number again.
Call history chronicles preceding incoming and outgoing calls.
To enter the call control menu, select option 9. Call Control in Menu 24 to go
to Menu 24.9 - System Maintenance - Call Control, as shown in the table below.
Figure 15-14 Menu 24.9 - System Maintenance - Call Control
15.8.1 Call Control Parameters
Figure 15-15 Call Control Parameters
Menu 24.9 - System Maintenance - Call Control
1. Call Control Parameters
2. Blacklist
3. Budget Management
4. Call History
Enter Menu Selection Number:
Menu 24.9.1 - Call Control Parameters
Dialer Timeout:
Digital Call(sec)= 30
Retry Counter= 0
Retry Interval(sec)= N/A
Press ENTER to confirm or ESC to Cancel: