User`s guide

Prestige 128+ ISDN Router
System Maintenance 15-13
15.4 Backup Configuration
Option 5 from Menu 24 - System Maintenance allows you to backup the current
Prestige configuration to your workstation. Backup is highly recommended once
your Prestige is functioning properly.
You must perform the backup and restore through the console port. Any serial
communications program should work fine; however, you must use XMODEM
protocol to perform the download/upload.
Please note that terms “download” and “upload” are relative to the workstation.
Download means to transfer from another machine to the workstation, while
upload means from your workstation to another machine.
15.5 Restore Configuration
Selecting option 6 from Menu 24 - System Maintenance to restore the
configuration from your workstation to the Prestige. Again, you must use the
console port and XMODEM protocol to restore the configuration.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so
even if power failure should occur, your configuration is safe.
15.6 Software Update
Software updates are only possible through the RS-232 cable connection. You
cannot use telnet to update the software version of your Prestige. Please note
that this function will delete the old software before installing the new software.
Do not attempt to utilize this menu unless you have the new software version.
There are two different software updates: RAS code and ISDN code.