User`s guide

Prestige 128+ ISDN Router
15-8 System Maintenance
15.2.2 Syslog And Accounting
The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record)
and system messages to a syslog server. Syslog and accounting can be configured
in Menu 24.3.2 - System Maintenance - Syslog and Accounting, as shown below.
Figure 15-7 Menu 24.3.2 - System Maintenance - Syslog and Accounting
You need to configure the following 3 parameters described in the table below to
activate syslog.
Table 15-3 System Maintenance Menu Syslog Parameters
Parameter Description
Active Use the space bar to turn on or off syslog.
Syslog IP Address Enter the IP Address of your syslog server.
Log Facility Use the space bar to toggle between the 7 different Local
options. The log facility allows you to log the message in different
files in the server. Please refer to your UNIX manual for more
detail.
Menu 24.3.2 -- System Maintenance - Syslog and Accounting
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.