User`s guide

Prestige 128+ ISDN Router
Telnet Configuration 14-1
Chapter 14
Telnet Configuration and Capabilities
14.1 About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring
it is through the console port. Once your Prestige is configured, you can use
telnet to configure it remotely as shown below.
Figure 14-1 Telnet Configuration on a TCP/IP Network
If your Prestige is configured for IPX but not IP routing in Menu 1, telnet is still
available provided you assign the Prestige a correct IP address and subnet mask.
When IP routing is disabled, the Prestige can still function as a host.