User`s guide

Prestige 128+ ISDN Router
10-8 L2TP
since the LAC’s IP address could be dynamically assigned each time a call is
made to the ISP, the user can enter any IP address in this case i.e., it is irrelevant
– see Figure 10-2. The LNS will accept the tunnel setup request from any IP
address as long as My Host Name and Shared Secret are correct.
The relevant SMT menus are as follows. See Chapter 6 for more information on
remote nodes. Four tunnel endpoint profiles can be defined in Menu 10.
Figure 10-5 Menu 10 – Tunnel Endpoint Setup
Selecting one endpoint profile takes you to the following menu.
Figure 10-6 Menu 10.1 Tunnel Endpoint Profile
Table 10-2 Tunnel Endpoint Profile Fields
Field Description
Endpoint Name This tells the Prestige the far end of the desired tunnel.
Active
Select Yes to activate this endpoint node.
My Host Name This is the name of the Prestige for L2TP authentication.
Menu 10 - Tunnel Endpoint Setup
1. ________
2. ________
Menu 10.1 - Tunnel Endpoint Profile
Endpoint Name= ?
Active= Yes
My Host Name= ?
Peer Host Name= ?